30
3. GL RFID Coupler Design
The GL4xxe RFID has
a coupler design that supports a
greater
variety of tag types. You
can move the coupler horizontally by using the coupler handle. See figures on
following
pages.
The coupler has four positions
on a four
inch printer.
Yellow:
1st Position (furthest inboard)
Orange:
2nd Position
Red:
3rd Position
Blue:
4th Position (furthest outboard on a 4 inch printer)
Once you select a
tag
type from the front
panel,
the
following message will
be
displayed on the LCD:
Where x is the word Yellow, Orange, Red and Blue
Set Antenna Pos
To x
If Done Press Enter
To Next Page
Loading...
