5
Overview
This User Manual describes the operation and programming procedures for RFID smart
labels (with embedded RFID tags) on the SATO GL4xxe series printers fitted with the
RFID Kit.
By incorporating RFID commands into the SATO
®
Basic Programming Language
(SBPL) programs as described herein, users can produce smart labels to take
advantage of the power of RFID technology.
This manual is organized as follows:
1. Introduction to the RFID configuration options in the GL4xxe series printer
firmware
2. RFID Command Specifications
3. GL4xxe Coupler Design
4. Error Messages and Troubleshooting
To Next Page
Loading...
