・
Pressing the CALL/OUT key while setting will return to the measurement
state.
③
MODE key
・
Used to display Current Date and Time, ID, Logging Interval, Logging
Option, Warning Thresholds or Preset Start.
④
REC/STOP key
・
Pressing the REC/STOP key for two seconds or more while measuring will
start logging.
・
Pressing the REC/STOP key for two seconds or more will end logging and
return to measuring temperature and/or humidity.
・
Pressing the REC/STOP key upon setting will conrm the newly set value.
⑤
POWER ON/OFF key
・
Pressing the POWER ON/OFF key will turn the unit on or off.
・
Pressing the POWER ON/OFF key while the unit is off will turn it on.
Pressing the key once again will turn off the unit.
Note: Be sure to press and hold the POWER ON/OFF key for one second
or more. This feature prevents the unit from being turned on or off
accidently.
To Next Page
Loading...