Safety Precautions
To use the Datalogger safely, follow the precautions below.
・
Never disassemble or modify the unit. Doing so may cause a malfunction.
・
The unit is precision-machined. Never drop the unit or knock it over.
・
Do not use the unit in a place exposed to direct sunlight or near a heat
source. Doing so affects the measurement accuracy, and could result in a
deformation or malfunction of the unit.
・
If this unit is used in an environment where electrical noise is generated,
the display may become unstable or the measurement error may
increase.
・
Never use the unit in an environment other than standard atmosphere (air
composition).
・
The main unit and probes are not waterproof. Never let them get wet.
・
Measuring temperature or humidity outside the measurable range may
result in unit and/or sensor malfunctions.
・
If the unit is not to be used for a long period of time, remove the batteries.
Otherwise, the batteries may leak, resulting in malfunctions.
・
Do not dispose of used batteries in a re.
・
Keep the battery out of the reach of children. If the battery has been
swallowed accidentally, consult a doctor immediately.
・
For environmental conservation purposes, dispose of the used battery in
compliance with local rules and regulations.
To Next Page
Loading...