SATO SK-L200 II Series - Standard Probes Specifications

−76 −
SK-LT II - 1 SK-LT II - 2 SK-LTH II
α
- 1 SK-LTH II
α
- 2
(Plug-in type) (w/ sensor cord) (Plug-in type) (w/ sensor cord)
8162-00 8163-00 8176-00 8177-00
Thermistor Thermistor
----- High Polymeric resistance change
humidity sensor
-10.0 to 60.0°C -40.0 to 105.0°C -10.0 to 60.0°C
20.0 to 98.0% RH (at 23°C)
±
0.5°C (20 to
30°C)
±
1°C at other
than above
±
2°C (-10°C or
lower)
±
0.5°C (15 to 35°
C)
±
1°C at other
than above
-----
46 g
Tip: 5 (dia.) x 20
(L) mm;
Cord 1.5 m
Body: 25 (W) x 62
(H) x 20 (D) mm
ABS resin,
PVC resin,
Stainless steel
±
0.5°C (20 to 30°
C)
±
1°C at other
than above
-----
16 g
25 (W) x 70 (H)
x 20 (D) mm
ABS resin
Model
Cat. No.
Sensor (Temp.)
(Humi.)
Measuring
range
Temperature
accuracy
Humidity
accuracy
Weight
Dimensions
Material
9-2. Standard Probes
refer to the charts of page 77
15 g
25 (W) x 70 (H)
x 20 (D) mm
ABS resin
65 g
Tip: 18 (W) x 51.3
(H) x 10.3 (D)
mm; Cord 1.5 m
Body: 25 (W) x 62
(H) x 20 (D) mm
ABS resin,
PVC resin
±
0.5°C (15 to
35°C),
±
1°C at other
than above