SATO SK-L200 II Series - Setting Current Date and Time

−17 −
3-2. Setting Current Date and Time
(1) Press the POWER ON/OFF key for one second or more to turn the unit
on.
The LCD turns on to indicate that the SK-L200T II or SK-L200TH II
α
is
in the measurement state for temperature or temperature and humidity,
respectively.
(2) Press the MODE key twice.
(3) The TIME mark lights and the "year" display ashes. Use the
▲
or
▼
key
to set the year (ex. “2012”)
Tips:
・
Hold down the
▲
/
▼
key to quickly change the value.
・
Press the MODE key to skip the current setting and to proceed to
the next item.
・
If no key is pressed for one minute, the unit returns to the
measurement state.
(4) Press the REC/STOP key to conrm the year setting.
(5) The "month" display ashes. Use the
▲
or
▼
key to set the month (ex.
“9” for September)
(6) Press the REC/STOP key to conrm the month setting.
(7) The "date" display ashes. Use the
▲
or
▼
key to set to "1". (For the day)
(8) Press the REC/STOP key to conrm the date setting.