SATO SK-L200 II Series - Operating the Computer

−40 −
6-2. Operating the Computer
Follow the steps below to download the test data to your computer.
(1) Make sure that the Datalogger is connected to your computer with the
provided USB cable.
(2) Press and hold the POWER ON/OFF key for one second or more to turn
on the Datalogger. The LCD turns on to indicate that the SK-L200T II or
SK-L200TH II
α
is in the measurement state for temperature or tempera-
ture and humidity, respectively.
Tip: If you connect the USB cable to a port different from the one
described in Chapter 4 "Installing DATALOGGER for Windows" Win-
dows may recognize
that a new device has
been connected on
startup.
(3) Click Start, all Programs,
SK-SATO, and then click
DATALOGGER for Windows
to run the program.
(4) From the Setting menu,
click
「
Serial Port
(
S
)
」
.