Overview
Datalogger is a device that logs data of temperature and/or humidity and
stores this data in its memory so that you can manage or analysis it on a
computer.
Features
●
Storage of up to 8100 lines of data. (
→
P.49)
Ensuring long-term measurement:
If the Datalogger is set to log data every 30 minutes, approximately 165
days. If the Datalogger is set to log data every 90 minutes, approximately
480 days.
●
Four logging options to allow for selection of the setting
that best suits your needs (
→
P.51)
1. Once (default)
The Datalogger keeps logging until the memory becomes full or 8100
lines of data are collected.
2. Repeatedly (overwriting)
The Datalogger overwrites the existing data from the start once the 8100
lines of data are collected. This setting is ideal for collecting data during
a certain period.
To Next Page
Loading...