3. Ends at… (limited amount)
The Datalogger only collects a certain amount of data (up to 8100 lines)
as specied by the user. This setting is ideal when you want to limit the
amount of data to be collected.
4. By pages (partitioning)
The Datalogger performs four different logging tasks in sequence by
storing each task's data in the four divided memory blocks. This setting is
ideal if you want to collect data from multiple sites with one Datalogger.
●
Scheduled logging (
→
P.60)
You can preset the time to start logging. This setting is ideal if you want to
start logging automatically.
●
Real-time communications (
→
P.64)
The logged data of temperature and/or humidity can be downloaded to
computers while the Datalogger is still logging.
●
USB connection
USB easily offers a connectivity to your computers than the conventional
RS-232C.
To Next Page
Loading...