SATO SX4M - 4 Unpacking the Printer

4 Unpacking the printer
1 Open the carton
2 Unpack the accessories
3 Unpack the inserts and the printer from the carton
4 Remove the inserts
5 Remove the rubber band (A) and the Velcro strap (B) from inside the printer
CAUTION!
Do not discard these parts; they are needed for your printer’s protec-
tion during shipping. Failure to use these parts in the event your
printer needs to be sent to SATO for maintenance and/or repair will
result in print head and armature damage. SATO will not be liable for
any damage related to improper packaging.
SX4M / SX5M / TXPSX4 / TXPSX5
Unpacking the printer
6
Fig. 1 Do not discard parts