50
*Note
1) Smart Wireless LAN Setup
-Smart Wireless Setup function easily set wireless settings with WPS (Wi-Fi Protected Setup). The smart
wireless setup corresponds to WPS 2.0.
-Each wireless mode can support following functions.
Station (Ad-Hoc/Infrastructure): Enrollee function Access Point: AP/Register function
(1) Supported Authentication
Smart wireless setup function supports a certain combination of authentication/encryption. Please refer to
the list below. After the communication with smart wireless setup succeeds, the printer works with the
setting set by smart wireless setup and the settings are kept after the printer reboot. When SSID /
Authentication / Encryption / Pre-Shared Key is manually changed, the settings by smart wireless setup
are released and the manual settings are applied.
(2) PIN Code Method / Push Button Method
Enrollee function can be used on smart wireless setup. The printer will connect to the access points by the
enrollee function.
PIN Code Method: When PIN Code is generated by the Generate PIN button, wireless connection is set.
Time out period is 120 seconds.
Push Button Method: Wireless connection is set by the Execute button in the web page after WPS button
on AP is executed. Timeout period is 120 seconds.
2) Internal Authentication Protocol
Authentication Protocols for Authentication Modes are as follows.
To Next Page
Loading...
