SATO WS408DT - 9 The WLAN tab

65
8.3.2 Disconnection during Print Data Sending
8.3.2.1 Common to Status 3 and 4
8.3.3 Disconnection during Status Sending after Print Data Reception
8.3.3.1 Common to status 3 and 4
Receive/Analysis/Edit
ID number = [12]
Print number = 50
Job name = [SATO]
Connected
(CONNECT)
Print command (STX-ETX)
×
[Note]
1. The print data may be lost when Bluetooth communication is disconnected during the print data sending.
Please resend the data after printer power off and on.
Disconnected
or communication
failure
Receive/Analysis/Edit
ID number = [12]
Print number = 50
Job name = [SATO]
Connected
(CONNECT)
Print command (STX-ETX)
Print operation
[Note]
1. When there is no ACK returned, stop the transmission as it appears that some sort of communication
interference is occurring.
2. ACK return may be lost when Bluetooth is disconnected before the printer returning ACK.
ACK
Disconnected
or communication
failure
[Note]
1. The print data may be lost when Bluetooth communication is disconnected during the print data sending.
Please resend the data after printer power off and on or resend the data after the print data is canceled.
×