SATO WS408DT - Setting of IP Address

60
7.10 Setting of IP Address
There are several ways to set the IP address such as obtaining from DHCP server, SBPL command or network setting
tool.
The printer acquires an IP address as shown in following flow below according to the acquisition method set in the
printer at power on.
* Obtaining IP address via "ARP-s" and ping is not available.
Printer power up
DHCP ENABLE?
DHCP process
DHCP success
The printer operates with
the IP address, netmask,
and gateway acquired by
DHCP.
The printer operates with
the IP address, netmask
and gateway set at the
printer.
Finish
YES
YES
NO
NO