SATO WS408DT - Printer Lights; Status Lights

1Introduction Printerlights
6
1.4 Printerlights
TherearetwoLEDlightsthatshowthestatusofyourprinter.
1.4.1 Statuslights
Statuslightshelpyoucheckprinter’scondition.Thefollowingtablesshow
theblinkingspeedofstatuslightsandtheconditionstheyindicate.

Symbol BlinkingSpeed BlinkingInterval

Fast 0.5Second

Medium 1Second

Slow 2Seconds

LED1 LED2 Description
Off Off Theprintmoduleisopenedwhentheprinteristurnedon.
Green Off Intheonlinemode.
Green Off Theprinteristransmittingdata.
Green Off Inapausestate.
Green Green TheprinteriswritingdatatotheflashorUSBmemory.
Green Green
The USB memory is being initialized. The process takes
about15seconds.
Orange Green Paperjam.
Orange Red Themediaisoutwhentheprintdataissenttotheprinter.
Orange Red Paperend.
Red Green Communicationerror(RS‐232C).
Red Green Cuttererror(withoptionalcutter).
Red Green
FlashROMontheCPUboarderrororUSBmemory error.
AneraseerroroccurredwhenformattingtheUSBmemory.
UnabletosavefilesduetoinsufficientUSBmemory.
Red Green Commanderror.
Red Orange Headhightemperatureerror.
Red Orange Theprintheadisbroken.
Red Red Cover(ThermalHead)openerror.
Red Red TheRT Cbatteryislow.(Iftheprinterhasabuilt‐inRTC)
All manuals and user guides at all-guides.com