SATO WS408DT - Turn On;Off Your Printer; Turn on Your Printer

2GetstartedTurnon/offtheprinter
9
2.2 Turnon/off yourprinter
Whenyourprinterisconnectedtoahost(acom puter),itisgoodtoturnon
theprinterbeforeturningonthehost,andturnoffthehostbeforeturning
offtheprinter.
2.2.1 Turnonyourprinter
1. To turnonyourprinter,turnonthePowerSwitchasbelow.The“I”isthe
ONposition.

2. Bothstatuslightsglowsolidorangeforafewseconds,andthenLED2
goesout,whileLED1turnstosolidgreen.


NoteIfyouconnectthe
printertotheinte rnetorinsertaUSBdrive
beforeturningontheprinter,itwilltakelongerfortheprintertoenter
theonlinemode(LED1glowssolidgreen)afteryouturniton.


All manuals and user guides at all-guides.com