SATO WS408TT-STD User Manual

1 Introduction Printer lights
7
1.4 Printer lights
There are two LED lights that show the status of your printer.
1.4.1 Status lights
Status lights help you check printer’s condition. The following tables show
the blinking speed of status lights and the conditions they indicate.
Symbol Blinking Speed Blinking Interval
** Fast 0.5 Second
* Slow 2 Seconds
* LED1 + *LED2 Slow LED1 & LED2 Blinking Interval at same time
* LED1 + LED2 * Slow
LED1 & LED2 Blinking Interval at different
timing
LED 1 LED 2 Description
LED indicate
Label
Green Green The printer is ready to print. V
Green ** Green The printer is transmitting data.
* Green * Green In pause. V
* Green Green *
The printer is writing data to the flash or USB
memory.
The USB memory is being initialized.
Green Orange Head high temperature. V
Green * Orange
The RTC battery is low. (If the printer has a built-in
RTC)
Green ** Orange
The print module is opened when the printer is
turned on.
Orange Orange Paper jam. V
** Orange ** Orange
The media is out when the print data is sent to the
printer.
Paper end.
V
** Orange Orange **
Ribbon end or ribbon error. (for thermal transfer
models)
V
Red Orange The printhead is broken.
Red *Orange Communication error (RS-232C).

SATO WS408TT-STD Specifications

General

Brand	SATO
Model	WS408TT-STD
Category	Barcode Reader
Language	English