satoh Buck S-470D - Foot Throttle Pedal Adjustment

3. Pulling the throttle lever fully backward allows the engine to run at
the maximum of 2,800 rpm.
4. Pushing the throttle lever fully forward causes the engine to stop
running.
NOTES: ________________________________________ __
1. The high speed adjusting bolt is preeadjusted and sealed, before
leaving the factory, so that the engine runs at the maximum speed
specified with the throttle lever pulled fully backward. If such speci-
fied speed is not obtained, consult your SATOH dealer.
2. Adjust the throttle lever properly with the nut at the throttle lever
supporting point so that it may not be moved by the vibration of the
engine nor by the tentioned governor spring and besides may control
the engine speed smoothly enough.
FOOT THROTTLE PEDAL ADJUSTMENT
By adjusting the hand throttle lever idle speed, the foot throttle idle
speed can be automatically adjusted.
-46 -