Step Step 21
417714www.sauder.com/services
Page 27
å
Insert two METAL PINS (1R) into the holes in the TOP (G2).
å
Fasten the INNER RIGHT END (B2) to the RIGHT TOP (G2). Tighten two TWIST-LOCK® FASTENERS.
å
NOTE: Be sure the METAL PINS insert into the holes in the INNER RIGHT END (B2).
å
Fasten the INNER RIGHT END (B2) to the SPACER (LLL). Use two BLACK 1-7/8" FLAT HEAD SCREWS (2S).
å
Fasten the RIGHT BACK (N) to the INNER RIGHT END (B2). Tighten two TWIST-LOCK® FASTENERS.
B2
Surface with
TWIST-LOCK
®
FASTENERS
G2
N
LLL
Surface with
TWIST-LOCK
®
FASTENERS
1R
BLACK 1-7/8" FLAT HEAD SCREW
(2 used in this step)
2S
To Next Page
Loading...
