Step Step 27
å
Fasten the FRONT PANEL (QQ) to the TOP RIGHT FRONT
MOLDING (BBB) on the RIGHT TOP (G2). Tighten two
HIDDEN CAMS.
å
Fasten the KEYBOARD UPRIGHT (VV) to the LEFT TOP (H2).
Tighten two TWIST-LOCK® FASTENERS.
å
NOTE: The remaining steps will show the Keyboard Drawer
on the left side of the unit.
KEYBOARD DRAWER ON LEFT
H2
QQ
VV
BBB
G2
Start Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
Surface with
TWIST-LOCK®
FASTENERS
417714www.sauder.com/services
Page 33
To Next Page
Loading...
