Sauder 417714 - Page 42

Step
å
Pull the TOP DRAWER FRONT BRACKETS (6G) apart and slide them
into the grooves in the DRAWER SIDES (D34 and D35).
å
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and "LH" for
easy identifi cation.
å
Fasten the TOP LEFT DRAWER FRONT (LL) to the TOP DRAWER
FRONT BRACKETS (6G). Use two BLACK 9/16" LARGE
HEAD SCREWS (1S).
å
Repeat this step for the right small drawer using DRAWER FRONT (GG).
Step 36
LL
D35
D34
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
1S
Push down
6G
D34
417714 www.sauder.com/servicesPage 42