32
4. Print No. Clear
This function makes the print sequential number reset to 001. Select “Print No Clear” using UP/DOWN key and
press START key.
5. Date & Time Set
Select “Date & Time Set” using UP/DOWN key and press START key then a new window will be open. Input
date and time using the numeric keys and UP() or DOWN() key. To save the change, press START key.
6. Station ID Set
Select “Station ID Set” using UP/DOWN key and press START key to enter. Using UP/DOWN key, input station
ID of the machine and then press START key to save the change.
In case two users (Dual User Mode) share the machine, separate Station ID should be set for USER 1 and for
USER 2 respectively.
(See submenu “Dual User” in Section. 6. Basic Operation)
7. Language Set
From the SB-9, Language menu is added. English and Russian are supported. You can select your language
at the menu. If the “Russian” is selected the Display says “RUSSIAN SELECTED”. Pressing the “C” key you
can find the Language changed to Russian on the Home Display and the Menu.
Reserved
This is reserved for an optional function.
To Next Page
Loading...
