Scaime IPM25 - Page 13

IPM25 User Manual
13
tedS
ENABLING TEDS DISABLES CALIBRATE MENU
Press
to skip this parameter and exit menu
Press
to enable or disable TEDS.
If you have chosen to enter the TEDS calibration, EnAbLEd? appears.
If you have chosen to enter the TEDS you will be prompted whether you want to select
EnAbLEd? if you do not press
,
otherwise press
. If you have selected enabled, two
flashing indicators will appear.
For more detailed TEDS calibration information, please refer to the TEDS section of the
manual.