SCAN 85 - Foundation and Floor Plate; Load-Bearing Foundation; Floor Plate Accessory

18
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan85\90585008.idw
90585008
Scan 85 med stor formgulvplade
26-02-2018
BC
Scan 85
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan85\90585007.idw
90585007
Scan 85 med lille formgulvplade
22-02-2011
BC
Scan 85
VÆGT:
AREAL:
N/A
N/A
Small oval shaped floor plate
in glass or steel
Large shaped floor plate in steel or
large base floor plate in glass
LOAD-BEARING FOUNDATION
The stoves of the Scan 85 series weigh from 204 kg to 220 kg.
You should of course make sure that the foundation on which the stove is positioned can indeed support the weight of the stove
and, where applicable, a steel chimney, if you have opted for this solution. In case of doubt about the carrying capacity of the
floor, please consult a building expert.
FLOOR PLATE
If you are placing the stove on a flammable floor, you must comply with the national and local regulations on the size of any
non-flammable subsurface required to cover the floor around the stove.
Your local Scan dealer can advise you on regulations concerning protection of flammable materials in the vicinity of your stove.
The floor plate’s function is to protect the floor and flammable material against any sparks that may occur. A floor plate can be
made of steel or glass, but the stove can also be erected on clinker concrete, natural stone or similar materials.
This Scan wood-burning stove has an integrated floor plate at the bottom and can thus be erected directly on flammable
material without the need for further protection underneath the stove.
(ACCESSORY)