OPM 200 en-GB 37
©
Scania CV AB 2014, Sweden
Lubrication system
7.
Remove the paper insert and scrape away
any remaining dirt deposits inside the rotor
cover. If the deposits are thicker than 28 mm,
the centrifugal oil cleaner must be cleaned
more often.
8.
Wash the parts.
9.
Inspect the 2 nozzles on the rotor. Ensure that
they are not blocked or damaged. Renew any
damaged nozzles.
10.
Check that the bearings are undamaged.
Property of American Airlines
To Next Page
Loading...
