To Next PageTo Next Page
Need help?Do you have a question about the Scanjet SC 40RT and is the answer not in the manual?
General| Brand | Scanjet |
|---|---|
| Model | SC 40RT |
| Category | Cleaning Equipment |
| Language | English |
Key technical specifications including weight, material, service space, rotation speed, flow, pressure, and temperature.
Detailed dimensions and drawings of the SC 40RT machine, including nozzle rotation diameters.
Specifications and diagrams for deck and inlet flange types compatible with the SC 40RT.
General guidelines for installing the SC 40RT, including orientation and custom gun unit configurations.
Recommendations for supply line installation, including filtration and flushing procedures.
Guidance on compatible cleaning media based on machine materials for safe operation.
Recommended procedures for flushing the system after cleaning operations.
Instructions for safely managing inlet pressure to prevent hydraulic shocks and wear.
Critical warning regarding electrical grounding and conductive piping in potentially explosive atmospheres.
Step-by-step guide for starting the SC 40RT machine, including checks and initial operation.
Specific procedure for cleaning tanks containing solidifying cargo, including air/nitrogen purging.
Guidance for monitoring the machine's operation, including leakage checks and nozzle housing behavior.
Procedures for safely shutting down the SC 40RT machine after cleaning operations are completed.
Procedure for using the SC 40RT for tank pickling and passivation, including chemical compatibility.
Methods for calculating cleaning time based on rotation speed and required cleaning media volume.
Step-by-step instructions for adjusting the rotating speed of the SC 40RT machine.
Recommended preventive maintenance program for ensuring long-term performance and reliability of the machine.
Information on available service kits for regular maintenance, including O-ring and wear kits.
Guidelines for service intervals, including pre-operation checks and periodic maintenance tasks.
Procedures for major overhaul, including component checks, grease changes, and parts replacement during drydocking.
Troubleshooting steps for diagnosing and resolving issues when the tank cleaning machine fails to operate.
Solutions for identifying and fixing problems related to improper cleaning performance.
Guidance on troubleshooting and correcting incorrect operating speeds of the machine.
Exploded view diagram of the SC 300 drive unit with part references.
Exploded view diagram of the SC 40RT gun unit with part references.
Exploded view diagram of the valve and connection components with part references.
List of spare parts and components required for the SC 40RT with 2 x Ø6 mm nozzles.
List of spare parts and components required for the SC 40RT with 2 x Ø7 mm nozzles.
List of spare parts and components required for the SC 40RT with 2 x Ø8 mm nozzles.
List of spare parts and components required for the SC 40RT with 2 x Ø9 mm nozzles.
List of spare parts and components required for the SC 40RT with 2 x Ø10 mm nozzles.
List of spare parts and components required for the SC 40RT with 2 x Ø11 mm nozzles.
List of spare parts and components required for the SC 40RT with 2 x Ø12-16 mm nozzles.
Contents of the KIT 40RT ODU service kit, an O-ring kit for the SC300 Drive Unit.
Contents of the KIT 40RT OGU-2 service kit, an O-ring kit for the SC40RT Gun Unit.
Contents of the KIT 40RT WGU service kit, a wear kit for the SC40RT Gun Unit.
