Scanjet SC 45TW - 13 Basic Settings

#SC 45TW-SS 10 – 110202 Page 33 of 40
13. Basic Settings
This lists serves as guidance for ordering spare parts depending on the number
and size of the nozzles on the machine. This list may be changed without prior
notice.
Nozzle size Ø 11 mm
Pos. Part No. Qty. Description
1 50155-11 2 Nozzle Ø 11
42 20018-44 1 Turbine Sleeve Ø 44
43 40011-40 1 Turbine T2 Ø 40
46 40046 1 Top Bearing Housing
Nozzle size Ø 12 mm
Pos. Part No. Qty. Description
1 50155-12 2 Nozzle Ø 12
42 20018-42 1 Turbine Sleeve Ø 42
43 40029-40 1 Turbine T1 Ø 40
46 40046 1 Top Bearing Housing
Nozzle size Ø 13 mm
Pos. Part No. Qty. Description
1 50155-13 2 Nozzle Ø 13
42 20018-44 1 Turbine Sleeve Ø 44
43 40029-42 1 Turbine T1 Ø 42
46 40046 1 Top Bearing Housing
Nozzle size Ø 14 mm
Pos. Part No. Qty. Description
1 50155-14 2 Nozzle Ø 14
42 20018-44 1 Turbine Sleeve Ø 44
43 40029-42 1 Turbine T1 Ø 42
46 40046 1 Top Bearing Housing