#SC 45TW-SS 10 – 110202Page 4 of 40
1. Introduction
SCANJET SC 45TW is a tank cleaning machine especially developed for cleaning
of cargo and slop-tanks on board chemical carriers/product carriers and other
applicable tanks. The size, construction and cleaning requirements of these tanks
are design criteria, which have been evaluated prior to installation.
The SC 45TW could be used as fixed installed machine as well as for portable
use, according to order specifications.
The cleaning procedure will start by open the valve for cleaning media. The
media flow will pass over a turbine inside the machine and the nozzles will
rotate, creating a crisscross cleaning pattern inside the tank. When the cleaning
procedure is finalized the valves are to be closed.
SC 45TW is as standard delivered with two nozzles, sizes between Ø 11 mm and
Ø 18 mm.
This manual has been prepared as a guide to facilitate for persons who will be
operating and maintaining the tank cleaning machine. The key for long tank
cleaning machine life will always be carefully planned maintenance, the tank
cleaning machine is actually doing a rough and dirty job for you. With proper
maintenance the Scanjet SC 45TW will keep servicing you for many years.
To Next Page
Loading...
