Scanprobe Maxprobe - Page 21

Maxprobe User Manual
Version 2.0
22 November 2023
21
The black bar down the right-hand side of the screen is used to display a range of icons to
indicate the status of the system (see Table 1). The current date and time is shown towards
the top of this icon bar below the Survey Mode icon.
Table 1: Maxprobe CCU Icons
Icon
Meaning
Notes
Basic Survey Mode
Default Survey Mode
Mina software reporting active
mina Survey Mode
WinCan software reporting active
WinCan Survey Mode
No camera detected
Camera detected
Video recording in progress
Only appears when a recording is in
progress
Temperature status
CANbus Systems Only
Pressurisation status
CANbus Systems Only
ATEX monitoring active
CANbus Systems Only
Sonde On (frequency will appear beneath
the icon)
CANbus Systems Only
LED Status
Illustrates the level of brightness for
the camera lights.
Internal storage
Default storage
USB storage
Only when USB storage has been
plugged in
Wi-fi connectivity and signal strength
Headset present
Wired connection activated
Only when connected to a compatible
device through wired link (USB cable)
Battery Status
Current battery status.
Software loading
Only appears on the WiFi menu while
checking for available networks