Scarab M6 - Lubricants and Consumable Parts; Other Fluid Levels

SCARAB M6 SWEEPER KIT
27 Operator’s Manual Amdt.1 - 03 November 2009
RECOMMENDED LUBRICANTS AND CONSUMABLE PARTS
DESCRIPTION SPECIFICATION QUANT SCARAB PART
Hydraulic Oil Derwent 32 5 litres 005005
Multi-purpose grease (Grease Points) Super Lithium 2 400 g 005007
Motor Oil 15W/50 5 litres 005001
Pneumatic Lubricant Scarab approved 50 ml 005046
Replacement Widesweep
Brush Discs (400 mm Dia)
Normal Brush
Extended B
rush
33
45
023474
Replacement Widesweep
Brush Discs (300 mm Dia)
Standard Brush
Extended B
rush
33
45
023471
Replacement Spacers (Widesweep) - 32/44 023472
Replacement Side Brush 315 mm Dia 1/2 023470
Replacement Side Brush 400 mm Dia 1/2 014066
Rubber Skirt, Side Brush 2 slot 1 012216
Rubber Skirt, Side Brush 3 slot 1 010247
Rubber Skirt, Side Brush 5 slot 014069
Front Skirt, Wide Sweep Standard Brush 1 022516
Front Skirt, Wide Sweep Extended Brush 1 014069
Suction Tube - 1 023154
Flap Kit, Suction Nozzle - Set of 3 024550
Clamp (Long), Suction Nozzle - 2 013025
Clamp (Short), Suction Nozzle - 1 013024
Seal, Suction Nozzle - Hopper - 1 013601
Seal, Rear Door - 1 010544
Wander Hose (trunking only) - 1 025214
Element, Hydraulic Return Filter - 1 013125
Element, Water Filter UCC Type 1 023863
OTHER FLUID LEVELS
BREATHER/FILLER
SIGHTGLASS
SUCTION
FILTER
RETURN FILTER GAUGE
For checking/topping up
the chassis engine’s fluid
levels, refer to the
manufacturer’s
documentation. Access
requires the hopper to be in
the fully raised position.
The hydraulic system’s oil-
lev
el sight glass and filler are
located on the oil tank on
the right hand side of the
machine.