ScentAir ScentWave - Device Lockcode Security; Activating Device Lockcode; Deactivating Device Lockcode

11
LOCKCODE
The ScentWave controls can be locked to prevent
unintended changes. When active, the display will
show Lockcode and the buttons and knob will not
perform their ordinary functions. Turning the knob
or pressing a button will display ‘CodE’ confirming
that the machine has been locked.
Both locking and unlocking the machine require the
user to enter the lockcode “4321”.
ACTIVATING THE LOCKCODE:
1. Press and hold the NEXT DIGIT button from
the home screen for three (3) seconds.
(Fig.16)
• Press - or + to adjust the digit value.
• Press NEXT DIGIT to move to the next
open slot.
• Repeat step for all open digits.
2. Press CHECK to confirm and lock.
DEACTIVATING THE LOCKCODE:
1. Press the NEXT DIGIT button. The words
Enter and Lockcode will appear on the
screen.
2. Press - , + to adjust the digit. Use the NEXT
DIGIT button to move to the next number
slot. Adjust the values to the universal unlock
code 4321. (Fig.17)
3. Press CHECK to confirm and unlock.
SCENT
EVENT
PAUSE
RUN
EVENT OVERRIDE
EVENT
SETTINGS
NEXT
DIGIT
RUN
MODE
SCENT
EVENT
PAUSE
RUN
EVENT OVERRIDE
EVENT
SETTINGS
NEXT
DIGIT
RUN
MODE
Fig.16: The words Set and Lockcode will appear on the
screen.
Fig.17: Enter the digits 4321 to unlock the ScentWave.