Sceptre C27 - Connecting and Configuring the Display; Video Input Connection Guide

- 16 -
www.SCEPTRE.com
SCEPTRE C27 FHD Display User Manual
Connections
If You have HDMI Connection on Your Video Card
1. Make sure the power of the C27 LED MONITOR is turned off.
2. Obtain a HDMI cable and connect one end to the back of the monitor and
the other end to the back of the computer.
3. Turn on the power of both the C27 LED MONITOR and the computer.
Please Note:
Make sure to set audio output from your computer to PCM output.