Sceptre C27 - Monitor Stand Assembly; Assembling the Monitor Stand

- 9 -
www.SCEPTRE.com
SCEPTRE C27 FHD Display User Manual
Assembling the Stand
1. Obtain the base and the neck of the monitor. Insert the neck facing at a 45 degree
angle. Afterwards, twist the neck in place and secure the installation by screwing
in the base screw from the bottom of the base.
2. With the monitor still lying in the package foam, lay it down on a table with the
display facing downwards. Open up the top foam exposing the back. Take out the
plastic covers shown in the picture below.