- 11 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
3. Take the monitor display and lay it flat on a table. Insert the stand to the back of
the monitor by inserting the neck plate area to the back of the monitor at an angle.
Match the two metallic ears into the back of the monitor first then close downwards
until you hear a clicking sound.
4. To finalize your installation of the display, please read the following:
a. If you are placing the display on a stand, we would recommend you to
use a display safety strap (not included) in order to minimize the
possibility of the display toppling over.
b. Securely install all screws and connections.
- 12 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
Removing the Stand for Wall Mounting
1. To uninstall the stand assembly, lay the monitor facing downwards on a table.
Press the button on the back of the monitor located near the monitor’s neck plate
and while holding the button down lift the stand assembly up.
2. Once the stand is removed, you will see the indentation with 4 holes. You can
mount the monitor using M4 screws at 30mm length.
To Next Page
Loading...
Need help?
General
