Sceptre E20 Manual

Page10 SCEPTRE E20
Opening the Package
The SCEPTRE E20 LED monitor is packaged in a carton together with standard accessories. Since the LED panel
can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass
facing downwards unless it is on a protective padding. When opening the carton, make sure the product is in good
condition and that all the standard accessories and items are included. After unpacking your LED monitor, be sure to
save the original box and all packing materials for future shipping needs.
Package Contents
 Monitor Display x 1
 Monitor Base x 1
 User Manual x 1
 Power Cord x 1
 VGA Cable x 1
Installing or Uninstalling the Base
1. Please place the base on a flat surface (i.e. table). Hold the monitor directly 90 degrees above the base.
Connect the monitor to the base by inserting the monitor into the base. To remove the base simply look at the
bottom of the base and unlock the two buckles at the bottom of the base.

Sceptre E20 Specifications

General

Brand	Sceptre
Model	E20
Category	Monitor
Language	English