Sceptre E20 Manual

SCEPTRE E20 Page11
Setting Up Your Monitor
The following are general short steps to setup and use the monitor with your PC
under the Windows 7 operating system.
1. After you have installed the base, connect your VGA or HDMI cord to both the
monitor and PC and turn on the PC and the monitor.
2. Under Windows, use your mouse to right click on the wallpaper and select the
RESOLUTION option.
3. Change your resolution to 1600x900 and click on APPLY.
For Microsoft Windows 10
1. After you have installed the base, connect your VGA or HDMI cord to both the
monitor and PC and turn on the PC and the monitor.
2. Under Windows, use your mouse to select Desktop.
3. Once you’re on the desktop, right-click on the wallpaper and select the
RESOLUTION option.
4. Change your resolution to 1600x900 and click on APPLY.

Sceptre E20 Specifications

General

Brand	Sceptre
Model	E20
Category	Monitor
Language	English