www.schaerer.com Programming
BASCJ_EN
V03 | 07.2015
42
Switching on time: On This menu item can be used to set the coffee
machine to switch on automatically at a certain
time.
► Switch the switch-on time on or off using the
button and button.
► Press the button.
The switch-on time is set to "on":
The time setting for the switch-on time
appears.
► Set the switch-on time using the button
and button.
► Press the button to exit the setting.
On/Off Recommendation:
Set the machine to
switch on 10 min before
it needs to be ready for
operation. The machine
will then be warm and
ready to dispense beve-
rages by the time it
needs to be operational.
Before beginning with
dispensing, ensure that
the drinking water tank is
full or that the mains wa-
ter supply is connected.
Switching off time: 30 min The switch-off time setting is used to switch off
the machine after a certain period elapses du-
ring which no beverage was dispensed.
► Set the switch-off time using the button
and button.
► Press the button to exit the setting.
The machine needs to be switched on again to
dispense the next beverage.
CAUTION!
Risk of machine
damage!
If the machine is switched off automatically
via the switching off time, a milk system rinse
is not performed. If the machine remains
switched off for an extended period, the milk
residue in the milk hose will produce germs
and mould.
Perform the milk system rinse daily during
the operating times. If the machine is to be
switched off for an extended period, a milk
system rinse must be performed before
switching the machine off.
0 (= off)
5 – 112 min
Automatic switching off
of the machine during
extended periods of di-
suse saves power.
Water hardness: 5-8 This menu item can be used to set the hardness
of the water being used in the coffee machine.
► Set the water hardness using the button
and button.
► Press the button to exit the setting.
0-4
5-8
9-12
13-16
> 16
This parameter is set du-
ring the commissioning
program.
See "Installation and
commissioning" - "Com-
missioning program" for
further information.
Water filter: Yes This menu item can be used to set the use of a
water filter.
► Set the use of a water filter to "yes" or "no"
using the button and button.
► Press the button to exit the setting.
Yes/No This parameter is set du-
ring the commissioning
program.
See "Installation and
commissioning" - "Com-
missioning program" for
further information.
Acoustic signal: On This menu item can be used to switch the acou-
stic signal for navigation in the programming and
for beverage dispensing on and off.
► Switch the acoustic signal on or off using the
button and button.
► Press the button to exit the setting.
On/Off –
Menu option (display text) Description Setting range Notes
To Next Page
Loading...
