Why is my Schaerer Coffee Joy producing no milk foam or milk output?
If you're getting no milk foam or milk output from your Schaerer Coffee Maker, even though there's milk in the container, first check the milk hose for any kinks and reroute it if necessary. Also, the foamer head may be clogged, take the foamer head out of the beverage outlet and clean it.
What to do if clear flow stopped in Schaerer Coffee Joy?
If the clear flow has stopped in your Schaerer Coffee Maker, it could be due to several reasons. First, try dispensing a cup of hot water to bleed the pipes. If that doesn't work, clean the sieve of the water filter, and if the problem persists, change the water filter. Also, the non-return valve at the outlet of the drinking water tank may be contaminated, clean the outlet and the non-return valve with one of the small brushes in the accessories. The brewing unit could be clogged, remove and clean the brewing unit. Finally, the grind level might be too fine; set it to a coarser setting and clean the brewing unit.
Why does the coffee from my Schaerer Coffee Joy Coffee Maker have no crema?
If your Schaerer Coffee Maker is not producing crema, it might be because the coffee is no longer fresh, replace the beans. Alternatively, the grind level could be too coarse, set the grind level to a finer setting.
Why is the milk from my Schaerer Coffee Joy too hot or has bubbles?
If the milk from your Schaerer Coffee Maker is too hot, the quantity is too low, or the milk foam has bubbles, it could be because the milk in the milk container is too warm. Only use pre-cooled milk (3 – 5°C) and cool the milk constantly during use. Also, the wrong milk nozzle might be in use, change the milk nozzle.
Why is there no milk foam or milk output in my Schaerer Coffee Maker?
If your Schaerer Coffee Maker is not producing milk foam or output even with milk in the container, check the milk hose for kinks and reroute if necessary. Also, the foamer head may be clogged. Remove it from the beverage outlet and clean it.
How to resolve 'place brewer' message on Schaerer Coffee Maker?
To resolve the 'place brewer' message on your Schaerer Coffee Maker, insert the brewing unit.
What to do if the grinder is blocked in Schaerer Coffee Maker?
If the grinder of your Schaerer Coffee Maker is blocked, switch off the machine, disconnect the power plug, and stir the coffee beans in the bean hopper using a spoon. If the issue continues, switch off the machine, disconnect the power plug, extract the beans, check the grinder, and remove any blockages.
What does 'EEPROM error' mean on Schaerer Coffee Maker?
If your Schaerer Coffee Maker displays an 'EEPROM error', this indicates a system error. Switch the machine off and back on.
Why is the brewing unit difficult to pull out and slide back in my Schaerer Coffee Joy Coffee Maker?
If the brewing unit of your Schaerer Coffee Maker is difficult to pull out and slide back in, it might be because the brewing unit is stiff. Remove the brewing unit. There are two nozzles with black sealing rings on the inside of the machine. Grease the sealing rings with grease from the accessories. Put the brewing unit back in place.
Why is the water tank difficult to slide in place on my Schaerer Coffee Joy Coffee Maker?
If the water tank on your Schaerer Coffee Maker is difficult to slide in place, it's likely that the O-ring on the water outlet connector needs to be greased. Grease the O-ring with grease from the accessories.
General| Bean hopper capacity | 500 g |
|---|---|
| Water tank capacity | 2.5 l |
| Pump pressure | 15 bar |
| Type | Automatic Coffee Machine |
| Power supply | 220-240 V, 50-60 Hz |
To Next Page
