www.schaerer.com Programming
34 / 56
Programming manual (Customer Program) / V03/05.2012
Beverage settings - Glass of tea water (hot water)
Beverage settings - Glass of tea water
1
MUST be selected, as otherwise the product button is disab-
led and the release is locked.
2
Activated = the "Hot water" (glass of tea water) product is
enabled. The setting under Point 7 can now be
activated as well.
Deactivated = the "Hot water" (glass of tea water) product is
locked.
Hot water can be dispensed by holding the button even if
metered dispensing is locked.
3
Activated = beverage dispensing can be stopped.
Deactivated = beverage dispensing cannot be stopped.
Press the button again to stop dispensing.
4
Activated = the "Hot water" product is enabled. The setting
under Point 7 can now be activated as well.
Deactivated = The "Hot water" product is locked.
"Glass of tea water" can be dispensed by pressing the pro-
duct button even if "Hold button" is locked.
5
No function
6
No function
7
Hot water dosage [ml].
8
[ EXIT ] button.
1
2
3
4
5
6
7
8
To Next Page
Loading...
Need help?
General
