www.schaerer.comProgramming
Programming manual (Customer Program) / V03/05.2012
29 / 56
Filter/energy tab
1
4
2
3
System conguration - Filter/energy
1
Activate when a water lter is inserted in the drinking water
tank.
2
Number of litres until the water lter needs to be replaced.
(This setting cannot be changed. It depends on the hard-
ness and its conguration on the "Tables" tab).
3
Number of days until the water lter needs to be replaced
(see information on the water lter packaging).
4
Do not change this value.
Water volume in litres used to rinse the water lter automati-
cally after installation.
Real time clock tab
5
1
2
3
System conguration - Real time clock
7
1
Activate if the date and time are to be shown in the display.
2
Activated = automatic adjustment of the time to daylight
saving/standard time.
Deactivated = the time must be adjusted manually.
3
Enables the machine to switch on automatically. The switch-
on time can only be adjusted on the machine.
4
Activates the automatic start from standby mode. The
switch-on time must be dened on the machine.
5
Setting of the time format.
6
Setting of the date format.
7
Pressing the button causes the time and date of the machi-
ne to be read out and displayed (see Point 7).
8
The values read out of the machine are displayed.
8
6
4