www.schaerer.com System status
18 / 56
Programming manual (Customer Program) / V03/05.2012
Miscellaneous tab
1
Activated when the main voltage (24V) is applied (for ex-
ample, if the grounds container is pulled out, 24V is not ac-
tive).
2
Activated when the machine is being cleaned or is in pro-
gramming mode.
3
Activated when a product of the second product level is
being dispensed.
4
Activated when the cleaning prompt is deactivated.
5
Activated when the descaling prompt is deactivated.
6
Activated when the water lter prompt is deactivated.
7
Activated when cleaning was delayed.
8
Activated if the grinding discs are still in the run-in phase.
9
Number of grinding cycles.
10
Activated when the brewing unit will reposition itself.
11
Motor current at present.
12
Indicates when the machine was switched on.
13
Indicates the duration for which the machine has been swit-
ched on.
14
Measurement value of the safety switches.
1
4
2
3
5
10
System status - Miscellaneous
6
7
11
12
13
14
8
9
Care tab
1
4
2
3
5
System status - Care
6
7
8
9
10
11
1
Number of days since the last cleaning.
2
Number of days until the next cleaning.
3
Number of products dispensed until the next cleaning.
4
Number of days since the last lter change.
5
Number of days until the next lter change.
6
Water volume in litres until the next lter change.
7
Remaining water quantity until mandatory lter change.
8
Number of brewing cycles until the next service.
9
Number of days since the last descaling.
10
Number of days until the next descaling.
11
Water volume in litres until the next descaling.
To Next Page
Loading...
Need help?
General
