Schaerer Coffee Joy - Water Quality Management; Water Quality Importance and Values

www.schaerer.com Additional functions
48 / 56
Programming manual (Customer Program) / V03/05.2012
► When the update has been transferred successfully, conrm the message with "OK".
► Under "Target" in the menu bar, execute the "Start Program" function to restart the coffee
machine.
Starting the coffee machine
► The HexLoad program closes.
Loading the basic conguration
► Establish the connection with the machine using the [ Start ] button (see „Starting communi-
cation“ auf Seite 12).
► Open the "Test functions" menu using the [ Test functions ] button (see Chapter "Test func-
tions" / „Commissioning“ auf Seite 35).
► Load the "Default conguration" (see „Default conguration“ auf Seite 39).
► Then conrm the following two messages.
This procedure overwrites the old conguration data in the working memory of the coffee ma-
chine with the new conguration data of the new software. This does not change existing
beverage settings.
► Load the "Default products" (see „Default Konguration“ auf Seite 48).
► Then conrm the following two messages.
Attention! All beverage settings that the customer made are overwritten.
Programming the machine specic values
► Open the "System conguration" (see „System conguration“ auf Seite 26).
► Enter the values you noted down in the corresponding elds of the "Parameters" tab.
► Remove the machine housing to read off the grinding performance and enter this value into
the corresponding eld (this value is specied directly on the grinder). See also „Parameters
tab“ auf Seite 26).
► Calibrate the grinder empty message (see also „Parameters tab“ auf Seite 26.)
► On the "Filter" tab, activate the water lter if necessary (see also „Filter/energy tab“ auf Seite
29).
► Leave the "System conguration".
► Transfer changes to the machine using the [ Send ] button.
Conrming after download