www.schaerer.com System status
16 / 56
Programming manual (Customer Program) / V03/05.2012
Function descriptions
System status tab
1
Start/stop communication with the machine. Changes ap-
pear directly on the screen if the machine is "online".
2
Start/stop communication with the machine. Changes ap-
pear directly on the screen if the machine is "online".
3
Operating status:
● Green = ready for use
● Grey = stand-by
● Yellow = coin tester enabled
● Red = fault
4
Number of selected products.
5
Coffee brewing time in seconds (brewing valve opening
time).
6
Effective preparation time of the selected product.
7
Beverage being dispensed (only if currently dispensing).
8
Heat the coffee and/or steam boiler.
9
Beverage dispensing is locked (for example, grounds con-
tainer not in place, water tank empty).
10
Activated when a beverage is being dispensed.
11
Activated when no beans are in the bean hopper.
12
Activated when no water is in the drinking water tank.
13
Activated when the owmeter does not indicate a water ow.
14
Activated when the brewing water temperature is not
reached.
15
Activated when the steam temperature is not reached.
16
Activated when a coffee product is being dispensed.
17
Activated when a milk product is being dispensed.
18
Display of the current status.
19
[ EXIT ] button.
20
Current brewing temperature in °C.
21
Current steam temperature in °C.
22
Programmed switch-off delay.
23
Selected aroma preselection.
The function of the switches and sensors, as well as
the various operating states and system settings, can
be tested and monitored in the "System status" menu.
5
6
7
8
12
18
9
10
11
13
2
1
19
20
System status - Machine status
14
15
16
17
21
22
23
3
4
To Next Page
Loading...
Need help?
General
