www.schaerer.comProgramming
Programming manual (Customer Program) / V03/05.2012
25 / 56
Default settings
The system configuration and all products are loaded from the default settings back into the
working memory. After the "Default settings" function is executed, the data must be reloaded
by pressing the [ Load ] button.
● Default settings = entries stored by the technician
● Machine conguration = basic default setting
Changing the service text
A service text can be displayed. The "Service text" window is shown in the Figure: "Changing
the service text". After being updated, the text must be sent to the machine. The service text is
displayed in the event of a malfunction.
Changing the service text
To Next Page
Loading...
Need help?
General
