www.schaerer.com Additional functions
42 / 56
Programming manual (Customer Program) / V03/05.2012
Service
► To open the service history, press the "Service" button or select "History" under "Display" in
the menu bar.
Displaying the service
The "Service" menu enables you to set up a service management system for the machine.
It operates on the basis of the "Preventive maintenance request" ("System programming" -
"System configuration"). The end user must be made aware that the service partner must be
contacted if the "Service!!!" message appears in the display.
Proceed as follows after service was performed (this will also reset the "Service!!!" message):
► The "Service history" menu opens (see Figure: "Displaying the service").
► The "Service history" display appears (see Figure: "Service history").
► Press the right mouse button: A context menu appears (see Figure: "Setting the service").
► Select [ Set service ] (see Figure: "Setting the service").
► Con rm the selection (see Figure: "Setting the service date").
To make changes, see „Changing the service text“ auf Seite 25
The machine number is likewise contained in the "Service history" (07-10-13032).
Service history
Setting the service
Setting the service date