7
Exchange pool (EXP) for all systems
We offer a complete stock of exchange units. You can order
after your specific needs, for example a measuring head or a
complete oil mist detector system. Our systems are based on
the principle “Plug & Play”. This means that it is easy for the
crew to make the installation of different parts in the
exchange pool. Installation documentation and return form
with return labels already filled out by us are following each
exchange pool component to make it easier for you as user
to ensure correct return of the defect components. Normal
return period is 60 days of the defect components. If you face
problems with delay, please contact us, and we will extend
the return period up to 120 days without any extra cost!
NOTE: According to warranty conditions when replacing
only measuring head alternative – you always must
replace maintenance kit for the specific model for
warranty to remain during the next 1-year period. All kits marked with «+» in the end of the part number contains
measuring head and maintenance kit for base plate. Example: 11651EXP+. When choosing complete exchange oil
mist detector, a maintenance kit is not necessary.
VN/87 EMC Measuring Head Exchange Pool
To Next Page
Loading...
Need help?
General
