Declaration of Incorporation
for the assembly of an incomplete machine
in accordance with the Machinery Guidelines 2006/42/EG,
Attachment II Part B
Schartec
a trademark from bau-shop-24 GmbH
Fritz-Müller-Strasse 119
73730 Esslingen, Germany
hereby declares that the door operators
Porte 150, Porte 300, & Jet 500
were developed, constructed, and produced in agreement with
− Machinery Guidelines 2006/42/EG
− Low-Voltage Directive 2014/35/EU
− Directive for Electromagnetic Compliance 2014/30/EU
− RoHS Guideline 2011/65/EU
− Radio Equipment Directive (RED) 2014/ 53/ EU.
The following standards were used:
− ISO 13849-1, PL „c“, Cat. 2
− EN 60335-2-95/ 103
− EN 61000-6-2/ 3
− EN 50581: 2012
− EN 301489-1 V1.8.1:2008
− EN 301489-3 V1.4.1:2002
− EN 300220-1 V2.1.1:2006
− EN 300220-2 V2.1.2:2007
− EN 12445:2001
− EN 12453:2001
The following requirements of the Machniery Guideline 2006/42/EG were adhered to:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.6, 1.3.2, 1.3.4, 1.3.7, 1.5.1, 1.5.4, 1.5.6, 1.5.14,
1.6.1, 1.6.2, 1.6.3, 1.7.1, 1.7.3, 1.7.4
The corresponding technical documents will be transmitted electronically at the request of the
agencies.
The incomplete machine is only specified for installation in a door system, in order thereby to
create a complete machine according to the Machinery Guideline 2006/42/EG. The door system
may first be in operation when it corresponds to the above-mentioned guidelines.
Esslingen, 29.02.2020 bau-shop-24 GmbH
Thomas Scharpf (CEO)
To Previous Page
Loading...
