Schartec P190 Control Box - Photocell Parameter Settings

LED Display Definition
Parameter
Table
Description
Photocell 1 function
Photocell 2 function
Buzzer function
Latch release function
(electric lock)
Open/Stop/
Close/Stop
function key
Pedestrian
Mode function
key
Reverse option
when closing
Reverse option
when opening
Functions of D
Key terminal
Functions of S
Key terminal
FC
FD
FE
FF
FG
FH
FI
FJ
FK
FL
FC-0
FC-1
FD-0
FD-1
FE-0
FE-1
FF-0
FF-1
FG-1
FG-2
FG-3
FG-4
FH-0
FH-1
FH-2
FH-3
FH-4
Function OFF
Function ON
Function OFF
Function ON
Function OFF
Function ON
Function OFF
Function ON
A Key
B Key
C Key
D Key
Function OFF
A Key
B Key
C Key
D Key
1. The factory setting is "FC-1".
1. The factory setting is "FD-0".
1. The factory setting is "FE-0".
1. When function is active, gate
moves slightly forward to
unlock the lock.
2. The factory setting is "FF-0".
1. The factory setting is "FG-1".
1. The factory setting is "FH-2".
1. FI factory setting FI-7.
2. FJ factory setting is "FJ-7".
1. FK factory setting FK-1.
2. FL factory setting is "FL-2".
No reverse
Reverse 2 seconds within 95% of total stroke.
Reverse 2 seconds within 90% of total stroke
Reverse 2 seconds within 85% of total stroke.
Reverse 2 seconds within 80% of total stroke.
Reverse 2 seconds within 75% of total stroke.
Reverse to the end within 95% of total stroke.
Reverse to the end within 90% of total stroke.
Reverse to the end within 85% of total stroke.
Reverse to the end within 80% of total stroke.
Reverse to the end within 75% of total stroke.
Double gates (Open/Stop/Close/Stop)
Single gates (Open/Stop/Close/Stop)
Pedestrian
Open
Stop
Close
No Function
FI/J-0
FI/J-1
FI/J-2
FI/J-3
FI/J-4
FI/J-5
FI/J-6
FI/J-7
FI/J-8
FI/J-9
FI/J-A
FK/L-1
FK/L-2
FK/L-3
FK/L-4
FK/L-5
FK/L-6
FK/L-7
30