Scheppach HS120 - Page 14

14
Fig. 13
After setting the riving knife, refasten the saw blade insert
(19) with 4 countersunk bolts M6 x 16.
Fig. 14
Fasten the cover (20) to the riving knife 18 with round-
head bolt M6 x 25, washer 6, and wing nut M6.
Fig. 15 / 15a / 15b
Connect the suction hose (21) to the suction hood (20)
and the suction nozzle.
Fig. 13
19
Fig. 14
18
20
Fig. 15
20
21
Fig. 15a
Fig. 15b