15
Fig. 16 / 16.1
Fasten the hooked bolt to the right-hand leg side using 2
washers 6 and 2 nuts M6. The hook serves for storing the
saw blade key and the push stick.
The 2 transport handles are attached at the left and right
leg at the front of the saw using 4 hexagon bolts M6 x 16,
4 washers 6, and 4 nuts M6.
Assembly of the lengthwise catch, Fig. 17 / 17.1
Put the storage pieces on the clasp. Mount the clasp to
the tabletop with 2 cylindrical screws M6 x 30, 2 serrated
washers A 6,4 and 2 hexagonal nuts.
Fig. 16
Fig. 16.1
Fig. 17
Fig. 17.1
To Next Page
Loading...
