Schindler 3100/3300/6300 J 43402603 / 01 74/269
Copyright © 2017 INVENTIO AG
Aluminium Recommended cleaning agents: Liquid cleaning and degreasing agents. Apply with a
soft cotton cloth or sponge, polish, and rub dry.
Copper, Brass,
Bronze
Recommended cleaning agents: Liquid chrome and brass cleaning agents. Apply
sparingly with a soft cotton cloth, polish, and rub dry.
Wood and Veneer Recommended cleaning agents: Liquid cleaning and degreasing agents. Apply with a
soft cotton cloth or sponge, polish, and rub dry.
Glass and Mirror Recommended cleaning agents: Commercially available glass cleaning liquid. Apply
sparingly with a soft cotton cloth, polish, and rub dry.
Synthetic Resin
Panels
Recommended cleaning agents: Commercially available plastic cleaner (solvent
containing alcohol or hydrocarbons). Clean with a soft cotton cloth. Apply cleaning
agents sparingly. Clean, polish, wipe dry.
Painted Finishes Recommended cleaning agents: Mild, liquid degreasing agents based on alcohol or
hydrocarbons. It is advisable to test the reaction on an unobtrusive spot before using on
a large surface. Clean with a damp, soft cotton cloth.
Plastic Laminates Recommended cleaning agents: Commercially available plastic cleaner. Containing only
alcohol or hydrocarbon solvents. It is advisable to test the reaction on an unobtrusive
spot before using on a large surface. Clean with a damp, soft cotton cloth.
Carpet Recommended cleaning agents: Commercially available carpet cleaning products or
solvents based on hydrocarbons or alcohol. Vacuum clean, shampoo, then rub with a
damp sponge. Wipe stubborn marks clean with a cloth soaked in solvent (based on
hydrocarbons or alcohol), then dry well.
Synthetic/
Rubberized Floor
Coverings
Recommended cleaning agents: Liquid cleaning and degreasing agents or alcohol such
as propyl alcohol. Wipe with a damp floor cloth.
Stone and Tiles Recommended cleaning agents: Soapy water.
Threshold Sills and
Tread Plates
Recommended cleaning agents: Warm, soapy water (not a detergent). Brush sill
channels to remove loose dirt and dust. Use vacuum cleaner where appropriate. Clean
off surface with a dampened cloth using a little warm, soapy water. Rinse using a clean,
dampened cloth and cool, clean water. Allow to dry.
Lighting Cloth dampened with soapy water (not a detergent). Clean off surface using a dry cloth.
Buttons, Indicators,
and Faceplates
To be treated as per instructions with the recommended cleaning agents for the specific
material as described in this part of the manual.
To Next Page
Loading...